Independent reviews of portable power stations and solar generators, sized by what you need to runHow we make money
Guide

Using a Power Station as a UPS

Leave it plugged in, plug your gear into it, and it takes over when the grid drops.

Plug a power station with a UPS (or EPS) mode into the wall and your router, modem, CPAP or computer into the station, and it switches to battery in about 10 to 20 milliseconds when the power fails, fast enough for most devices, though desktop PCs are safest with a 10ms station or a small UPS in between.

Updated November 18, 2026 · By the editors of The Power Station Report · We earn from qualifying purchases

Switchover times

What works

  • Routers, modems, ONTs: fine with any of these; they ride through 20ms easily.
  • Laptops: fine, they have their own battery.
  • CPAPs: fine; they'll keep running.
  • Desktop PCs: most ride through 10ms. Some reboot at 20ms. For important work, put a small computer UPS between the PC and the station.
  • Fridges and freezers: fine.

Battery health

Leaving a LiFePO4 station plugged in all the time is what these UPS modes are built for, and the cells tolerate it well. Several apps let you cap the charge at 80 to 90%, which reduces wear. EcoFlow, Anker and Bluetti all include that setting.

Questions

Can I leave my power station plugged in all the time?

Yes, for stations with a UPS mode. Set a charge limit below 100% in the app if it has one.

What's the difference between UPS and pass-through?

Pass-through just powers devices while charging; a UPS mode is designed to switch fast when the input drops. Some stations with pass-through switch too slowly for computers.

Keep reading