The Best Power Stations for Home Backup
Home backup means different things: a night of fridge and Wi-Fi, or a well pump and furnace on a transfer switch. Here's what to buy for each.
For 240-volt home backup through a transfer switch, get the EcoFlow Delta Pro 3; for the most output and expansion, the Anker SOLIX F3800 Plus; and for plug-in backup of the fridge, freezer and Wi-Fi without an electrician, the Bluetti Elite 200 V2.
Our picks
EcoFlow Delta Pro 3
4kWh at 120/240V, L14-30 outlet, expandable to 12kWh, on wheels.
- Price
- About $2,400
- Capacity
- 4,096Wh
- Output
- 4,000W, 120/240V
- Recharge
- About 50 min to 80% on 240V; 1,800W on 120V
- Weight
- 113.5 lb
Anker SOLIX F3800 Plus
6,000W and up to 26.9kWh with expansion. The pick for big loads.
- Price
- About $2,300
- Capacity
- 3,840Wh
- Output
- 6,000W, 120/240V
- Recharge
- 1,800W from a wall outlet, about 2.5 hrs
- Weight
- 136.7 lb
Bluetti Elite 200 V2
No electrician needed: run extension cords to the fridge, freezer and router for about a day.
- Price
- About $900
- Capacity
- 2,073Wh
- Output
- 2,600W, 120V
- Recharge
- About 1.4 hrs (1,800W)
- Weight
- 53.4 lb
Jackery HomePower 3000
3kWh and a 30A TT-30 outlet for about $1,500; can't run 240V loads.
- Price
- About $1,500
- Capacity
- 3,072Wh
- Output
- 3,600W, 120V
- Recharge
- About 2.2 hrs
- Weight
- 59.5 lb
EcoFlow Delta 3 Plus
1kWh now, up to 5kWh later. Covers the fridge overnight on its own.
- Price
- About $700
- Capacity
- 1,024Wh
- Output
- 1,800W, 120V
- Recharge
- 56 min (1,500W)
- Weight
- 27.6 lb
Side by side
| Station | Capacity | Output | Voltage | Expands | Price |
|---|---|---|---|---|---|
| EcoFlow Delta Pro 3 | 4,096Wh | 4,000W | 120/240V | Up to 12kWh with 2 extra batteries | About $2,400 |
| Anker SOLIX F3800 Plus | 3,840Wh | 6,000W | 120/240V | Up to 26.9kWh with 6 batteries | About $2,300 |
| Bluetti Elite 200 V2 | 2,073Wh | 2,600W | 120V | No | About $900 |
| Jackery HomePower 3000 | 3,072Wh | 3,600W | 120V | No | About $1,500 |
| EcoFlow Delta 3 Plus | 1,024Wh | 1,800W | 120V | Up to 5kWh with extra batteries | About $700 |
Plug-in or wired in?
Plug-in backup means running extension cords from the station to the fridge, freezer, router and a lamp. It needs no electrician and works with any station, but it can't power hardwired loads like a furnace blower, well pump or ceiling lights.
Wired-in backup uses a generator inlet with an interlock, or a manual transfer switch, so the station feeds chosen circuits in your panel. An electrician installs it, typically for a few hundred to a couple thousand dollars depending on the setup. You need a station with a matching outlet: an L14-30 for 120/240V, or a TT-30 for 120V-only inlets. See how to connect a power station to your house.
Never connect a power station or generator to your house through a regular wall outlet with a double-male cord. It can energize the utility line and kill a lineworker, and it can start a fire.
How much capacity
A fridge, chest freezer and Wi-Fi together average about 115 watts, so 2kWh lasts about 15 hours and 4kWh about 30. A furnace blower, well pump or sump pump adds a lot depending on how often it runs. Use the runtime calculator, and plan on solar panels if outages in your area last more than a day or two.
Questions
Can a power station run my whole house?
Not the way a whole-home generator does. Even a 4kWh station runs only essentials for about a day. Big 240V stations with expansion batteries and solar can cover essentials for several days.
Do I need a transfer switch?
Only to power hardwired circuits like a furnace, well pump or lights. For a fridge and devices, extension cords work.
How long can a power station run a refrigerator?
About 14 hours on 1kWh, 29 hours on 2kWh and 58 hours on 4kWh for a fridge averaging 60 watts. See fridge runtimes.