Independent reviews of portable power stations and solar generators, sized by what you need to runHow we make money
Guide

Can a Power Station Run a Sump Pump?

Yes, if it can handle the start-up surge. Runtime depends on how often the pump runs, which depends on the storm.

Yes: a 1/3 or 1/2 horsepower sump pump needs a power station with about 1,500 to 2,000 watts of output and enough surge to start it, and a 1kWh station can cover several hours of a heavy storm or a day or more of occasional cycling.

Updated November 18, 2026 · By the editors of The Power Station Report · We earn from qualifying purchases

What a sump pump draws

PumpRunning wattsStarting watts
1/3 hpAbout 800W1,300 to 2,000W
1/2 hpAbout 1,000W2,000 to 3,000W
3/4 hpAbout 1,300W3,000W+

Check your pump's label for amps and multiply by 120. Starting watts can be two to three times running watts.

How long it lasts

A sump pump runs in bursts. The question is how many minutes per hour. In a moderate storm a pump might run 5 minutes an hour; in a heavy one, 20 or more.

Pump runs per hourAverage draw (1/3 hp)1kWh station2kWh station
5 minutesAbout 67Wabout 13 hoursabout 26 hours
15 minutesAbout 200Wabout 4.4 hoursabout 8.8 hours
30 minutesAbout 400Wabout 2.2 hoursabout 4.4 hours
A backup pump is still the best plan

If your basement floods in every storm, a dedicated battery backup sump pump installed beside the main pump is the most reliable fix. A power station is a good second line, and runs the fridge too.

How to connect it

Unplug the sump pump from the wall outlet and plug it into the station with a heavy-gauge extension cord rated for the amps. Don't run the cord through standing water. If the pump is hardwired, you'll need a transfer switch.

Best value

Anker SOLIX C1000 Gen 2

Price
About $550
Capacity
1,024Wh
Output
2,000W, 120V
Recharge
49 min (1,600W)
Weight
24.9 lb
Best for long storms

Bluetti Elite 200 V2

Price
About $900
Capacity
2,073Wh
Output
2,600W, 120V
Recharge
About 1.4 hrs (1,800W)
Weight
53.4 lb

Questions

Will a 1000W power station run a sump pump?

Only small pumps. A 1/3 hp pump needs about 800 watts to run and 1,300 to 2,000 watts to start. Get a station with 1,800 watts or more.

Can I leave the sump pump on the station unattended?

Yes, that's the point. Check the battery level every few hours in a heavy storm, and recharge when you can.

Keep reading