Power Station vs UPS: Which Backup Do You Need?
A computer UPS bridges seconds to minutes. A power station with a UPS mode can carry you for hours.
Use a computer UPS for a desktop PC or NAS that must never drop, since it switches in milliseconds or not at all; use a power station with a 10ms UPS mode for routers, modems, laptops and monitors that need to run for hours.
| Computer UPS | Power station in UPS mode | |
|---|---|---|
| Runtime at 100W | Minutes (typical 600 to 1,500VA unit) | Hours: about 8 on 1kWh |
| Switchover | Line-interactive about 2 to 10ms; online 0ms | About 10 to 20ms |
| Battery | Often lead-acid, replaced every 3 to 5 years | LiFePO4, thousands of cycles |
| Software shutdown | USB signal to shut down the PC | Usually none |
| Cost | $100 to $300 | $220 and up |
The best of both
For a home office, plug the computer into a small UPS, and the UPS into a power station that's plugged into the wall. The UPS covers the switchover gap and sends shutdown signals; the station supplies hours of runtime. See using a power station as a UPS.
Questions
Can a power station replace a UPS?
For routers, modems, laptops and lights, yes. For desktop PCs and servers, a 10ms station usually works, but a dedicated UPS is safer.
What's the fastest UPS switchover on a power station?
EcoFlow and Anker list 10ms or under on the River 3 Plus, Delta 3 Plus, C1000 Gen 2 and Delta Pro 3.